Kubota Manufacturing of America partnered with Conveyors & Drives, Inc. to design and implement a conveyor system to extend the assembly line through the crating process. Space was very limited and the conveyor system would have to handle crated and non-crated RTV’s at the same time. RTV weight was upwards of 3500 pounds and crates were up to 12 feet in length with various locations of cross boards on the bottom. Prior to the conveyor install, Kubota was shipping completed RTV’s to a satellite facility for final crating. Moving the crating process to the end of the assembly line would increase efficiencies in assembly.
Kubota Manufacturing of America is the premier manufacturer of Rough Terrain Vehicles (RTV), Tractors and Lawnmowers for both the consumer and agricultural industries. Headquartered in Gainesville, GA, Kubota Manufacturing of America builds and ships equipment around the world.
Conveyors & Drives installed custom built belt-over-roller conveyor and custom drag chain conveyor with pop-up chain transfer to meet the goals set by Kubota. Since space was an issue, transferring the finished crates ninety degrees allowed for staging of two complete units without interfering with the crating process. Belt- over-roller conveyor assured smooth conveyance of various sized pallets and the pop-up chain transfer assured each pallet would transition properly. All conveyors were built to heavy duty standards so Kubota could also convey a non-crated RTV and physically drive the finished product off the end of the assembly line. Installation was completed by Conveyors & Drives, Inc. with controls provided by Kubota.
Conveyors & Drives provided Kubota Manufacturing of America with a heavy duty conveyor system to handle the extreme loads and various sized crates they use during final crating. Kubota was also able to integrate the crating process to the end of the main assembly line, rather than shipping to a satellite facility for final crating. Keeping the line running smoothly and efficiently was a requirement that Conveyors & Drives was able to deliver on.
New, aesthetic Conveying System for the future
The young Swiss startup Avancon SA (www.avancon.com) has set itself the goal to revolutionize the unit handling systems in distribution and logistics centers. They offer now a new modern and very innovative conveying system. This will be distributed worldwide by manufacturers of conveyor systems and logistic system integrators. The system has been developed by Dieter Specht, the founder of the Interroll Group.The car industry, the computer industryand even the machine industry presentevery few years new and moderndesigned models. Why? To be able toattack new markets and new customers.However, it is hard to see somethingnew in the conveyor industry.
Most ofthe unit conveyor systems weredeveloped 15, 20 or even 50 years agoand are still sold today in a construction,which remembers on the patents of theBritish toy manufacturer Frank Hornby,who has already registered his patent ofa “Meccano” kit in 1901.Now, the two young founders of the start-up Avancon SA are ready to revolutionize the conveyor industry with thisnew and streamlined concept. It’s full of innovative and functionalideas and has been patented worldwide.
Originally, Dieter Specht had developed this systemfor Interroll. But it didn’t fit to their philosophy. So hefound two enthusiastic entrepreneurs, Denis Ratz,he has a bachelor of science in business informaticsand Dr. Daniele Gambetta, who has a PhD inelectric machines. They established inTicino/Switzerland a new start-up under the name Avancon SA (from Avant-garde and Conveyor).
The CEO, Denis Ratz showed the new conveyor system to some large and important manufacturers of conveyor- and logistics-systems and got a very positive response.
“Of course, we wanted to see the reactions to our completely new and very modern designed conveyor concept,” says Denis Ratz. “Most were positively impressed about the outstanding design. I could answer all their questions about the functions and requirements of the market. After these meetings with CEOs and technical managers of big and well-known companies I was highly motivated. Now we are ready. Everything is finished and tested. We can deliver. Several potential customers will visit our large test facility here in Ticino. We believe that the functions and the many advantages of this innovative system will convince them.”
Avancon SA invested heavily into development, in machines, in molds, patents and in the production. With a clever marketing concept enables an exclusive group of Conveyor Manufacturers and System Integrators worldwide to promote the system under their own label/brand and house color to the final market, the operators of logistics and distribution center.
Denis Ratz explains: “We want to offer something avant-garde to the manufacturers of conveyors and intralogistics systems. But we don’t want to interfere with the market of our customers and we will not offer to distribution- and logistics-systems directly to operating companies. Even though this modern system will catch the eye of every manager of this industry.”
The partner and head of technique, Dr. Daniele Gambetta, is an experienced specialist for electronic control and DC-motors. He has patents of completely new DC-motors, which will also be integrated in the future in the Avancon Conveyor System.
“Today – in the digital age of ‘industry-4’ – the electronic connectivity is of enormous importance. I was very fascinated by the ideas of Dieter Specht, so I have joined this young start-up,” says Dr. Daniele Gambetta. “I have never seen such a convincing new concept in the conveyor industry. Everything is completely different, new, safer and much better. We believe that about 80 % of all goods up to 50 kg weight, which have to be transported millions of times worldwide every day, can be handled with this new system.”
Meanwhile, the design has been awarded by the internationally well known “Red-Dot” price in Germany and also by the very coveted throughout Asia, “Good-Design” award in Japan.
The two partners have a lot of courage to break into such an established market today. But who would not want to offer their customers something very aesthetic, even revolutionizing, which differs to all previous designs?
Why aesthetic? Well, ask yourself: would you buy today a machine, which is not modern covered? Now you can offer your customers something extraordinary that combines innovation with emotions.
Denis Ratz says: “We are very positive about the future. We have just moved into a newly built modern factory, which corresponds to our DNA. Here we have a daily capacity production of up to 400 meters conveyor tracks of our new ZPC- system. Anyone who builds conveyor systems by himself can obtain all individual elements from us and so use the patents free of charge. Several customers want to exhibit the new system at one of their upcoming trade fairs.
‘ZPC’ system means “Zone Powered Conveyor” system, in which each zone is controlled and driven separately. The system is extremely flexible and adaptable. It is capable of slow or fast transporting in any desired line and, where necessary, can accumulate without pressure. The system can also communicate with higher IT or Bus system very easily and at significantly reduced installation cost.
Of course it transports goods in all directions, with all the functions an engineer wants for logistics systems.
Last but not least it seems to be much cheaper than it looks.
Automated sortation system installed specifically to deal with “small traffic”
The UKs largest dedicated parcel carrier officially opened its new purpose built, 15,000 square metre, parcel distribution hub in Warrington back in 2014. Designed to support the continuation of growth of the company the new hub has a capacity of around 550,000 parcels a day – almost three times that of the previous site in Warrington.
The facility’s purpose was to help with the developing requirement for next day deliveries, playing a key role in plans for international expansion and to provide a platform for further innovation, as the company looks to introduce a host of new products to the market.
L.A.C Conveyor Systems Ltd is now entering its 4th year, working closely with the multinational delivery company, in the development and implementation of innovative, flexible technologies to suit the ever-evolving challenge of handling parcels from a wide range of shapes and sizes whilst achieving faster processing times.
L.A.C Conveyor Systems innovative
The latest challenge was to introduce a sortation solution specifically designed to accommodate small sized parcels. Prior to the new solution the sortation of “small traffic” was a combined sortation process, with larger parcels. This combined automated parcel sortation approach meant that smaller parcels were harder to control and ultimately ended up being manually sorted. This system required a lot of human intervention to gain full control, proving not the most efficient approach, as the accuracy of the sort could not be guaranteed. Separating smalls from larger parcels meant higher throughputs could be achieved utilising a more streamlined solution with a 100% accuracy of sort.
L.A.C Conveyor Systems innovative “Automation Toolbox” meant a combination of technologies could be combined to satisfy the required solution and could be delivered and implemented within a small footprint and with minimal disruption to current operations.
The solution utilised L.A.C designed induct/feed conveyors, handling bulk parcels on infeed for initial parcel separation, which were then separated further utilising a flighted belt conveyor, leading on to a horizontal conveyor with 5 moveable ploughs and 1 fixed. The parcels were then broken down further spread across 6 chutes, presenting parcels to an operator platform. Operator interaction at this stage of the process provided a means of orientating parcels and placing them onto a Equinox split tray sorter with barcode labels accessible for automated scanning and verification.
The Equinox split tray sorter is a tray-based “bomb-bay” sorter developed specifically to handle flat goods such as packets, books, garments, parcels, and accessories, making it the ideal choice for L.A.C to integrate as part of a turnkey solution. The system offers the capacity to sort 10,000 trays per hour exceeding the requirements, but offering scope for future growth. It has a characteristic oval-shaped conveyor on which the trays circulate. This “open oval” design allows operators and further automation to integrate with ease.
An overhead scanning system ensured parcel identification and location could be achieved at high speed. L.A.C’s modular software design structure offered a seamless link with the host IT system, completing the final piece of the puzzle.
This unique automation approach has ensured a fast and flexible response to future e-commerce demands and has enabled an increased ability to handle parcels of such a shape and size in such a controlled manner. L.A.C’s diverse inhouse skill set has offered a solution that is cost effective providing faster processing of incoming “small” parcels.
Modernising the supply chain network
System to handle small sized parcels only
Cost effective and efficient flow of goods to consumers
Selecting & implementing the best technology
Allow for more next-day delivery
Increased order accuracy
Overall reduction in costs
Integrate with latest supply chain technology
Key services & Technologies
Feed conveyor – shaft mounted motor, tapered hopper to allow product to fall onto flyted belt conveyor.
Modular belt conveyor with hopper
Discharge conveyor with high side for product control
5 off moving ploughs and 1 fixed. Underslung braked motor with pivot arm connected to plough
6 off discharge chutes
6 off operator stations
Each discharge station offering PTL button light module
Double tray wide oval sorter
Sorter gross capacity (10,000 trays per hour)
Tray type 7 DT Double Tray – (Bombay also known as split tray)
Sorter direction – Clockwise
Barcode label control linking carton to station
Item detection sensing
Omni Camera Scanner – Overhead system for barcode label capture
L.A.C IT hardware and Software integration
Wireless network connection
VPN Remote Access
100% Accuracy of sort.
Increased supply chain efficiencies
Sortation direct into shipping cartons
Easy to use, simple efficient design and low maintenance decrease cost and increase uptime.
Design allows for the highest accuracy as well as a very small footprint without losing throughput.
Overhead Conveyor Automates Electroplating System
PACLINE Overhead Conveyors has developed a pre-engineered system for handling the 10 to 12 foot long copper bars used in Electro-Plating shops. This sophisticated design has eliminated the necessity of using hand operated trolleys for the transfer of workloads to and from the hoist lines of plating tanks.
The PAC-LINE™ overhead conveyor, using our standard No. 175 Bar Carrier Trolley, can transport loads in excess of 400 lbs. Our special design allows the 10 to 12 foot long work bar to manoeuver the standard radius curves of the overhead conveyor with ease. Loaded racks can be easily transferred from the overhead conveyor to the hoist for dipping as required.
This system is designed to allow the transfer of the loaded work bar directly from the hoist to the overhead conveyor. This loading signals the conveyor to run until the empty No. 175 trolley is in position to receive the next loaded work bar from the plating line.
The same system applies to the opposite end of the plating tanks. Loaded work bars are automatically delivered to the front of the line of plating tanks. The hoist can quickly pick up the loaded bar carrier, beginning the plating process.
The entire conveyor system is synchronized to allow both the empty bar carrier and the loaded carrier to stop automatically at opposite ends of the elecroplating line, so that the loading and unloading of the hoist can be completed simultaneously between the conveyor’s cycles.
This proven Electro-Plating system can substantially increase your production and at the same time eliminate unnecessary labor.
Conveyor Types1 year ago
Conveyor Systems: Total Cost of Ownership
Belt Conveyors2 years ago
Continental Radar-Based Monitoring System Makes Conveyor Belt Systems More Efficient and Reliable
New Products2 years ago
Best Product 2021 for KNAPP’s ivii.smartdesk Work Station
Conveyor Components2 years ago
Conveyor Sensor System ready to go
Genel1 year ago
Coal conveyor application
Conveyor Accessories2 years ago
All about roller conveyors
Pallet Handling2 years ago
Interroll expands Modular Pallet Conveyor Platform (MPP) with flexible and powerful control solution
Intralogistics2 years ago
MHS introduces cross-belt sorter with double-cell design for small items