Leuze is launching an innovative mounting bracket for their 25C sensors that saves conveyor system manufacturers both time and money
New special mounting brackets for the sensors of the 25C series for pallet detection.
Designed for reliable pallet detection, the sensor and bracket are supplied as a pre-assembled set to enable the conveyor system manufacturer to pre-mount to the conveyor in the factory, which is traditionally done on-site during the installation and commissioning phase of the system.
A perfect fit inside the conveyor
The innovative new mounting brackets are designed specifically to fit the 25C series sensors. This means that the conveyor system manufacturer can install the sensor and bracket set inside the conveyor thus protecting it from potential damage. The integrated sloping front screen of the bracket deflects any dirt or debris that may fall onto it ensuring that the all-in-one solution requires less cleaning and maintenance than systems that rely on standard retro-reflective photoelectric sensors.
In addition, the special ambient light configuration of the 25C sensors ensures that they are insensitive to high-frequency LED illumination used that is often found in production and logistics buildings and can cause unreliable operation of other types of diffuse sensors. Pallets are notoriously difficult to detect with diffuse optical sensors due to the differences in colour and surface. However, thanks to the detection performance and outstanding function reserve of the 25C sensors from Leuze these issues are easily overcome and reliable detection of different pallet types is ensured.
Managing sloping production lines – 3 possibilities
Height differences between machines can become a problem in production – especially if you have to disrupt the production line, for this costs money and requires resources. Luckily, there are several ways to manage height differences.
Disturbances in a production line are a nightmare for any manufacturer, for if the line does not run smoothly, this costs time and money and requires work. Interruptions due to height differences must therefore be eliminated. There are various ways to manage this. An inclined belt conveyor with belt studs is especially suited for the transport of small plastic or metal parts. With very tight spaces and parts that have to be processed, a lift is a good solution. And a small load carrier buffer system can handle product transport from A to B.
Solution 1: Inclined belt conveyors
An inclined belt conveyor is a simple and cost-effective solution. Because it automates manual tasks, it’s an economical investment for the long term. Procurement costs are recouped quickly, and you save time and money and conserve resources. Inclined belt conveyors also make space. Thanks to their slope, you can use the height and not just the width and length of a room. The machines can be set up closer together, so there is more space for other things. Another benefit is the flexibility of an inclined belt conveyor. If you want to change your production line around, you can remove the inclined belt conveyor from the production line very easily. No conversion is required, so you can use the inclined belt conveyor elsewhere if necessary.
Solution 2: Lift
If there’s a little more money available, a lift is a smart solution. With a pneumatic lift, workpieces move from one level to the next by themselves for seamless processing. In addition to flexibility and variability on the main assembly and production line, a lift also offers easy, direct access to production cells. Furthermore, it allows you to make optimal use of production space; a lift is elegant and it also saves space.
Solution 3: Small load carrier buffer system
If an electric drive will not solve the problem, a buffer system with roller conveyors can help connect different levels. This space-saving system minimizes errors and reduces time lost in production. And if automation is what you want, this is also possible: The small load carrier buffer system is also available with driven belt conveyors and can be automated with lifts.
NSK bearings save costs when maintaining ship loading conveyor
When the need arose to replace the bearings supporting a bend pulley on a ship loading conveyor at an iron ore port in Australia, NSK designed a solution using spherical roller bearings that were not only made from its proprietary HTF tough steel, but also featured a detachable nitrile seal. The result was an extension in service life leading to significant savings in downtime costs.
Due to the operating environment, the mining and quarrying industry requires highly reliable equipment that can withstand harsh conditions. So when the bearings on a bend pulley serving a ship loading conveyor had only six months of operating life remaining, the iron ore port called upon the expertise of NSK to devise a better solution.
NSK’s team of experts investigated the bearing failure, discovering that heavy iron ore particle ingress and water contamination in the failed bearing’s lubricant had compromised the service life of the bend pulley. Any conveyor components exhibiting curtailed operating life will incur costs for maintenance hours and lost production.
To address the issue, NSK’s engineering specialists set about designing a new solution based on the company’s proven line of spherical roller bearings. In the first instance, NSK decided to manufacture the bearings from its unique HTF tough steel. Tough Steel is an effective countermeasure to the wear commonly found on the outer ring raceway, where the fixed load zone material is prone to wear when experiencing fine particle ingress.
NSK’s long-life HTF series bearings utilise advanced material engineering and heat treatment technology, thus facilitating superior resistance to wear, seizure and elevated temperatures. The outcome is dramatically longer service life and reduced costs for maintenance and unplanned downtime. Indeed, HTF series bearings can offer as much as 10 times the service life in contaminated lubrication conditions, such as those experienced at the iron ore port facility.
Another key design feature of the NSK proposal was removable nitrile seal (HNBR) garter sprung seals, which compensate for seal wear to further extend operating life. The lip contact maintains pressure even under misalignment.
As well as the extension to service life – the NSK sealed spherical roller bearings achieved 12 months of trouble-free operation – the detachable seal provided the iron ore port facility with the ability to check radial internal clearances using feeler gauges during the fitting process.
In short, this notable design feature enables accurate management of the proper clearance as part of bearing assembly procedures. The concept centres on a seal mounted to a ring/holder that is fully detachable (via bolts), providing sufficient access for feeler gauges to perform clearance measurements. Furthermore, this unique design offers complete interchangeability with existing solutions.
PureSteel® metal belts provide a custom, cleanroom-compliant solution
Two of the most important factors in a medical manufacturing space are accuracy and cleanroom capability. When a U.S. based medical equipment manufacturer required a metal belt with a pitch profile that didn’t currently exist, they turned to Belt Technologies. We were able to solve the issue and begin a successful partnership that has lasted more than two decades.
Arthur G. Russell Company Inc., based in Bristol, Connecticut, is a preferred turnkey automation system manufacturer with a team that delivers effective results. As the world’s premier provider of custom assembly systems for high-volume disposable medical device production—from syringes to pen needles and pipettes—AGR prides themselves on creating the machines that make it all.
With such a wide array of offerings, the customer is unique in the sense that they build custom automation machinery, much of which requires belts with very specific pitches (the space between individual perforations, timing pins or other such features). In 1998, the client began their search for a company that could provide a conveying solution for a new medical device assembly machine. The machine needed to move small needles for automated assembly of a medical device, so a very precisely designed custom belt was necessary. The required solution needed to excel in a cleanroom environment, while offering repeatability and the personalization of a custom pitch.
During the search for a suitable manufacturer, the customer initially reached out to a different company, but were disappointed to learn they could only offer a belt with a standard pitch. Undeterred, AGR continued their search and struck the right chord with Belt Technologies.
Belt Technologies provides several advantages over other manufacturers, including a focus on accuracy, cleanroom compatibility and customization, while offering non-stretch products that do not require lubrication. As customization was the most important aspect for Arthur G. Russell, we were able to work alongside them to create a personalized solution which met their exact specifications. And it’s not just about custom perforation pitches; our customization options also include a broad array of metal alloys, belt width and thickness combinations, perforation patterns, coatings and attachments. Our engineering team was heavily involved in the conversations with AGR’s customer, ensuring they reached a solution that would last.
Repeatable accuracy was also critical to AGR’s design, which meant we had to supply a product capable of holding tight tolerance on the pitch. This was possible due to the fact that metal belts do not exhibit pulsation—enabling precise transmission of the control system’s motion profile. To ensure the most accurate and reliable motion possible, PureSteel® metal belts are manufactured to dimensions with very tight tolerances. This detail-oriented focus allows us to fabricate metal belts with a pitch accuracy of ±0.0005”, which is valuable in designing, indexing, positioning or processing bulk medical devices.
The final stipulation was cleanroom compatibility. Unlike polyurethane, nylon, rubber or fabric belts, metal belts can withstand vacuum conditions and caustic environments. Additionally, metal belts do not require lubrication and do not generate particulates, making them cleanroom compatible and ideal for the customer’s exact specifications.
The customer reports that the belts last an exceptionally long time. In fact, this solution, which was created for the machine in 1998, is still in use today, and AGR’s customers are pleased with the results.
Following this original order, Belt has held a longstanding, trusted partnership with Arthur G. Russell for more than two decades. They remain the client’s only supplier of precision, thin steel belts, creating a variety of custom belts for new machines over the years.
The Company: A turnkey automation system manufacturer with a team that delivers effective results. As the world’s premier provider of custom assembly systems for high-volume disposable medical device production—from syringes to pen needles to pipettes AGR prides themselves on creating the machines that make it all.
“You can call them [Belt Technologies] and speak to an actual engineer and get design support and advice on their systems. They are dependable, reliable and we like to work with them on custom projects. They are always willing to help us out.”
Arthur G. Russell Company Inc.
Conveyor Types1 year ago
Conveyor Systems: Total Cost of Ownership
Belt Conveyors2 years ago
Continental Radar-Based Monitoring System Makes Conveyor Belt Systems More Efficient and Reliable
New Products2 years ago
Best Product 2021 for KNAPP’s ivii.smartdesk Work Station
Genel1 year ago
Coal conveyor application
Conveyor Accessories2 years ago
All about roller conveyors
Pallet Handling2 years ago
Interroll expands Modular Pallet Conveyor Platform (MPP) with flexible and powerful control solution
Intralogistics2 years ago
MHS introduces cross-belt sorter with double-cell design for small items
Intralogistics2 years ago
TGW implements its first SAP EWM project